2-We67k-500/6000 Tandem Press Brake, Tandem Bending Machine

• Condition: New
• Certification: SGS, CE
• Automation: Semi-Automatic
• Suitable for: Aluminum, Alloy, Carbon Steel, Stainless Steel
• Type: Hydraulic Bending Machine
• control voltage: 24V
• Model NO.: 2-WE67K-500x6000
• control type: DA52 or DA65W
• Transport Package: Steel Pallet and Covering with Plastic Film
• Specification: max force as 1000T, max length as 1200mm
• Trademark: HYMT
• Origin: China
• HS Code: 84622990
• Production Capacity: 100 Units/Month

Product Description

Main functions:
1 The frame of machine is composed of tank, worktable, left and right housings and
RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate
Stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic
Proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to "C" plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
Main Specification:

MODEL	Nominal PressurekN	Length of Tablemm	Distance between Housingsmm	Throat Depthmm	Strokes/ Strokesm/min -1	Open Heightmm	Main MotorkW	Weightkg)	Overall DI-mensionsL*W*H) (MM)
2-WE67K-320/7000	3200	7000	5600	720	250/≥1.5	870	22	38000	7150*4575*5570
2-WE67K-400/7000	4000	7000	5600	720	320/≥1.5	870	30	46000	7150*3560*5900
2-WE67K-600/6000	6000	6000	4800	1000	320/≥1.5	1000	45	62000	6080*4435*7300
2-WE67K-800/6000	8000	6000	4800	1250	350/≥1.5	1300	55	90000	6240*7480*6200
2-WE67K-1000/6000	10000	6000	4800	1400	400/≥1.5	1400	2*45	125000	6240*8080*6600
2-WE67K-1200/7000	12000	7000	5600	1600	450/≥1.5	1600	2*45	155000	7100*7315*7800
2-WE67K-1200/9000	12000	9000	6500	1100	450/≥1.5	1250	2*45	165000	9240*8080*7650
2-WE67K-1600/7000	16000	7000	5600	1600	450/≥1.5	1600	2*55	190000	7200*5900*7900
2-WE67K-1600/9000	16000	9000	6500	1100	450/≥1.5	1250	2*55	177000	9240*8133*8250
2-WE67K-2000/9000	20000	9000	6500	1600	450/≥1.5	1600	2*75	297000	9240*9050*8800
2-WE67K-2200/8000	22000	8000	6000	1100	450/≥1.5	1250	2*75	245000	8240*8500*8200
2-WE67K-3000/7000	30000	7000	5240	1600	450/≥1.5	1600	4*55	335000	7300*10800

Our Services
1.Standardization of Service "212"
2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days
2.Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer's factory for
installation and preoperation of machines.
3.Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you may send
your technician to our company to learn how to operate machines.
4.Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.